Sanding & Sealing

Why Re-Sanding Matters After Pressure Washing
Deep pressure washing is the best way to remove stubborn moss, weeds, and black algae from interlocking pavers, but it also flushes out the old, worn-down sand between the stones. Leaving those joints empty weakens the entire surface.

Once your pavers are completely clean and dry, re-sanding is essential to protect your investment:

  • Prevents Paver Shifting & Sinking: Joint sand locks individual pavers together so they don't shift, tilt, or settle unevenly under foot traffic or parked vehicles.

  • Blocks Weeds & Moss Growth: Filling and stabilizing the gaps stops windblown weed seeds and moss spores from taking root between stones.

  • Keeps Insects Out: Eliminates open crevices where ants and pests love to nest.

  • Resists Rain Washout: Whether stabilized with polymeric binders or locked in with a joint-stabilizing sealer, your joints stay firm through heavy Fraser Valley rain.

Choose the Right Protection for Your Pavers

Option 1: Pressure Wash & Polymeric Re-Sanding
Ideal if you want clean, stabilized pavers without a sealed finish. After washing and drying, we sweep commercial-grade polymeric sand into the joints and activate it with water so it cures into a firm, flexible bond that resists weeds and washout.

Option 2: Full Wash, Jointing Sand & Protective Sealer
Our most complete protection. We fill the dry joints with fine paver jointing sand and apply a commercial-grade joint-stabilizing sealer across the entire surface. The sealer penetrates deep into the sand to lock the joints rock-solid while protecting the pavers from stains, fading, and weather.

Why Seal Your Pavers?

  • Locks In Joint Sand: Hardens the jointing sand from top to bottom so it stays firmly in place.

  • Rich Colour Enhancement: Brings back faded colour and gives pavers either a clean natural matte finish or a subtle wet-look sheen.

  • Stain & Oil Protection: Repels motor oil, leaf stains, and grime so future spills wipe away easily.

  • Easier Maintenance: Slows down new moss and algae buildup, keeping your driveway or patio looking great for years.

Our Paver Cleaning, Sanding & Sealing Process

1. Deep Pressure Wash & Joint Clearing
We thoroughly wash the paver surface and flush out old, weed-filled sand from every joint.

2. Surface Prep & Settling
We clear away all runoff and prep the surface so your pavers are ready for fresh joint sand.

3. Precision Sand Installation
We sweep fresh sand deep into every joint, compact the pavers so there are no air pockets, and blow off all excess dust.

4. Sand Activation or Sealer Application
Depending on your package, we either activate the sand with a light mist or apply an even coat of commercial paver sealer to lock the joints and protect the stone.

OUR SERVICES